Commercial Treadmill Assembly Guide 1
Thank you for choosing Precor. For proper installation, please read
this guide thoroughly and follow the assembly instructions. If you do
not assemble the treadmill according to these guidelines, you could
void the Precor Limited Warranty.
Obtaining Service
You should not attempt to service the treadmill except for
maintenance tasks as described in the Product Owner’s Manual.
If any items are missing, contact your dealer. Should you need more
information regarding customer support numbers or a list of Precor
authorized service centers, visit the Precor website at
www.precor.com/contact.
Unpacking the Equipment
The unit is shipped in one box. Ask for help from two or more
people to unpack and assemble the treadmill.
Required Tools
• ½-inch box end wrench or crescent wrench
• String
• SAE Standard socket set
• Bubble level
• Wire tie cutter
Installation Requirements
Follow these installation requirements when assembling the unit:
• Assemble the unit near the location where you plan to use it.
• Provide ample space around the unit. The minimum space
requirement needed for user safety and proper maintenance is
three feet by six feet (one meter by two meters) square, directly
behind the running belt.
• Set up the unit on a solid, flat surface. A smooth, flat surface
under the unit helps keep it level. A level unit has fewer
malfunctions.
• Open the box and assemble the components in the sequence
presented in this guide.
• Leave room for adjustments. Tighten fasteners (bolts, nuts, and
screws) so the unit is stable, but leave room for adjustments. Do
not fully tighten fasteners until instructed to do so.