Viewing the Error Log
ERROR LOG appears on the display followed by the first entry in the error log if there are any errors. Up to ten error codes can be retrieved.
If there are no errors in the log, you will see NO MORE ERRORS displayed.
7.To view any additional error codes in the error log, use the arrow keys. Each error code specifies when it occurred, listing the odometer and hour meter values. Refer to Diagram 8.
SmartRate
|
| Cardiovascular | Above | Heart Rate |
|
|
|
| Weight Loss | 1 |
| Most recent error | |
Below |
|
| ||||
|
| |||||
|
|
|
| (Error code index) | ||
Error code
12000 MI 1714 HrS 
Odometer reading at the | The hour meter at the time the error |
time the error occurred. | was detected. |
Diagram 8: Error log
Note: The C954i display is different. The error code index appears on the center display followed by the error code. Press the CHANGE keys to toggle between the error code and error description, odometer reading and hours of use at the time the error occurred.
8.Copy the error code information to paper so you can provide it to Customer Support if needed. Be sure to copy it exactly as shown.
9.When you no longer need the information in the error log, press QUICKSTART for at least four seconds to erase the error log. Continue to maintain light pressure on the key until the message OK (C954i) or CLEARED (C956i and C966i) appears. When the key is released, 1:
Important: You cannot retrieve the error log once you have deleted it. You may want to resolve any issues you are experiencing with the treadmill before clearing the error log.
10.When you are ready, press ENTER to move to the next display (serial number).
Product Owner’s Manual: Club Features | 17 |
