Precor C952i, C966i C952i Entertainment Power Connection, Informational Displays

Product Owner’s Manual: Club Features 16
C952i Entertainment Power Connection
The entertainment power port on the C952i treadmill provides a
power-only connection. It cannot handle CSAFE protocols. You may
use the port to connect to entertainment products. Contact Precor
Customer Support for compatibility information. Refer to Obtaining
Service.
Informational Displays
(C954i, C956i, C966i)
The treadmill provides information about its use (odometer and hour
meter), as well as software version, error log, and serial number. In
general, you would only access this information if directed to do so by
Precor Customer Support.
These instructions guide you through all the informational displays.
Pressing the ENTER key moves you through the displays. To exit,
press the RESET key at any time.
Viewing the Odometer
1. At the Precor banner, press the following keys in sequence and
without pause:
RESET, 6, 5
ODOMETER appears on the display followed by the odometer
value (the number of cumulative miles or kilometers users have
taken).
2. When you are ready, press ENTER to move to the next display
(hour meter).
Viewing the Hour Meter
HOUR METER appears on the display followed by the number of
hours that the unit has been in use. The treadmill tracks the
elapsed minutes, but the value that appears is truncated to the
nearest full hour.
3. When you are ready, press ENTER to move to the next display
(software version).
Viewing the Software Version and Part Numbers
SW VERSION (C954i) or SOFTWARE VE RSION (C956i and
C966i) appears on the display followed by the upper board
application software part number and version (for example,
48181-350).
4. To see the upper boot and lower board application software
version, use the CHANGE key (C954i) or arrow keys (C956i and
C966i). If needed, you can move through all three—upper board,
upper boot, and lower board—using the appropriate keys.
Note: If a part number does not exist, 00000-000 appears.
5. Write the numbers below. You will need these numbers when you
call Customer Support with display-related questions. This
information will help rule out any software-related problems:
Upper Software P/N: _____________
Lower Software P/N: ___________________
Upper Boot Application P/N: ___________________
6. When you are ready, press ENTER to move to the next display
(error log).