Displaying the Serial Number
SER NUMB (C954i) or SERIAL NUMBER (C956i and C966i) appears on the display followed by the
Note: If no serial number has been entered, then NONE appears. Use the serial number found on a label on the front panel (Diagram 3).
11.If you have not already done so, write the serial number onto the Warranty Registration card. You can also register online at www.precor.com.
12.When you are ready, press ENTER to return to the Precor banner.
User ID Entry with CSAFE Equipment (C954i, C956i, C966i)
The treadmill is fully compatible with CSAFE protocols. When the unit is connected to a CSAFE master device, the user is prompted for a user ID.
Note: The C952i port does not provide a connection to CSAFE protocol devices.
The user ID is displayed as five zeros. The left most zero blinks indicating your starting point. The following table describes key functions while in CSAFE mode.
Keypad | Description |
|
|
SPEED ▼ or ▲ | moves the blinking LED from field to field |
|
|
INCLINE ▲ or ▼ | changes the number value in the selected field |
|
|
Number keypad | use the number keys to enter a user ID. The number |
| that is pressed appears in the display and the next |
| field begins to blink. When all five numbers are in |
| place, the user must press ENTER to submit the user |
| ID. |
|
|
ENTER | submits the user ID. |
| Note: User ID entry is bypassed when the user |
| enters five zeros. No workout statistics are recorded. |
|
|
RESET | resets the display to the Precor banner. |
|
|
A message appears on the display and indicates when the user ID is accepted by the CSAFE master device. Then, the program prompt appears. The user has the option to choose QUICKSTART or select a program and begin exercising.
To review information about CSAFE specifications, visit the web site at: www.fitlinxx.com/csafe
If you have questions or need technical support, refer to Obtaining Service.
Product Owner’s Manual: Club Features | 18 |
