Product Owner’s Manual: Club Features 14
Enabling or Disabling the Fitness Test
The Fitness Test is disabled at the factory. When the Fitness Test is
disabled, it is not available in the list of programs. If you wish to add
the option to the user’s choice of programs on the treadmill, you need
to enable the Fitness Test.
Note: If you enable the Fitness Test on either the C956i or C966i, it
replaces Custom 2 (program number 16).
16.At the FITNE SS TEST prompt, use an arrow key to display
ENABLE or DISABLE, depending on whether or not you want to
allow access to the Fitness Test.
17.When you are ready, press SELECT (C952i) or ENTER to s ave
the selection and return to the Precor banner.
Note: If you prefer to exit the program without changing the
selection, press RESET or the red STOP button.
Informational Displays (C952i)
The treadmill provides information about its use (odometer and hour
meter), as well as software version, and error log. In general, you
would only access this information if directed to do so by Precor
Customer Support.
These instructions guide you through all four informational displays.
Viewing the Odometer
1. At the Precor banner, press the following keys in sequence and
without pause:
RESET, SPEED▼, SELE CT
Numbers appear on the display as you press the associated key.
MILES (KILOMETE RS) appears on the display followed by the
odometer value (the number of cumulative miles or kilometers
users have taken).
2. When you are ready, press SELECT to move to the next display
(hour meter).