Printronix P3000 Series manual Extended Character Set

Extended Character Set

	ASCII	Hex	Decimal
P–Series	SO (Shift Out)	0E	14
	SFCC SO	SFCC 0E	SFCC 14
	SFCC n	SFCC 6E	SFCC 110
	SFCC 4	SFCC 34	SFCC 52
Serial	ESC 4	1B 34	27 52
Purpose	Accesses the extended character set in the range A0 to FF hex using codes 20 to 7F
	hex.

Comment Used in 7–bit systems as if data bit 8 was set to 1. For example, sending code 20 hex accesses the symbol at code point A0 hex. If a printable symbol is not available at the code point, a space is printed.

SFCC 4 is not cancelled by the next paper motion command; all other commands are cancelled by paper motion.

Refer to the character set charts in Appendix B.

6–38 Programming