Printronix P3000 Series manual Character Pitches Available by Print Mode, 333 434

Print Mode/Pitch Selection (continued)

Table 6–7. Character Pitches Available by Print Mode

NOTE: The hex values shown (i.e., 0 and 30) are evuivalent.

Either value can be used in your program expression.

m (hex):	0(30)	1(31)	2(32)	5(35)	6(36)	7(37)	8(38)
Print	Data		High
	Processing	Correspondence	Speed			Barcode	Barcode
Mode:	(DP)	(NLQ)	(HS)	OCR–A	OCR–B	145	160
n (hex):			Characters per inch:
0(30)	10	10	10	10	10	–	–
1(31)	12	12	12	–	–	12.1	–
2(32)	13.3	–	13.3	–	–	–	13.3
3(33)	15	15	15	–	–	–	–
4(34)	17.1	–	17.1	–	–	–	–

NOTE: The print mode (m) must be changed before the first printable symbol of a print line (spaces included) or the command sequence is deferred until the next line.

NOTE: When using the Multinational character set in OCR–A or OCR–B print mode, a unique character set is used. Refer to the Multinational Character Sets chapter for more information.

Example	Any of the BASIC expressions listed below select the Data Processing print mode at
	17.1 cpi.
where	m (print mode = 0 or 30 for Data Processing; and
	n (pitch) = 4 or 34 for 17.1 cpi.
	CHR$(1);“X”;CHR$(0);CHR$(4);
	CHR$(1);“X”;CHR$(30);CHR$(34);
	CHR$(1);“X04”;

6–58 Programming