Printronix P3000 Series manual Form Feed, Hex Decimal Series Serial Purpose

Form Feed

	ASCII	Hex	Decimal
P–Series/
Serial	FF	0C	12
Purpose	Prints the data in the buffer, advances the paper to the next top–of–form, and moves
	the printhead to the first character column.
Comment	The default forms length is determined by the configuration in nonvolatile memory.
	Forms length is set by using the control panel F/L switch or forms length control
	codes. Code FF cancels all single–line only print attributes.

The Form Feed command reacts differently in the P–Series and Serial Matrix emu- lation modes when the VFU is active. Refer to the Vertical Format Units chapter.

6–40 Programming