Printronix P3000 Series manual Forms, Miscellaneous

Forms

Paper

Type	Edge–perforated, fanfold, 3 to 16” wide
Thickness	Single–part – 15 to 100 lb. stock
	Multi–part – 1– to 6–part forms
Sheet Thickness	0.025” maximum
Drive	Adjustable tractors (6–pin engagement)
Slew Rate	8” per second maximum
Labels
On Backing	One–part continuous perforated fanfold back form.
	Labels must be placed at least 1/6 inch from the
	fanfold perforation. Backing adhesive must not be
	squeezed out during printing.
Sheet Size	3 to 16” wide, including the two standard
	perforated tractor feed strips. A maximum sheet size
	of 12” between top and bottom perforations.
Thickness	Not to exceed 0.025” (including backing sheet)
Forms Control
Skip–Over Perforation	1, 1/2, 2/3, 5/6 inch; Control Panel Selectable
Vertical Format Units (VFU)	IBM Serial Matrix Vertical Tabs
	Programmable P–Series EVFU
	Dataproducts compatible direct access DVFU

Miscellaneous

Ribbon

Standard	Printronix P/N 107463
Carbon Black	Printronix P/N 108506 OCR
Fabric	Nylon, 1 inch x 60 yards
	spool–to–spool;
	Metal reverses on each end

NOTE: Use only ribbons that meet the stated specifications.

C–4 Appendix