Printronix P3000 Series manual Sfcc @

Printer Reset

	ASCII	Hex	Decimal
P–Series	SFCC @	SFCC 40	SFCC 64
Serial	ESC @	1B 40	27 64
Purpose	Initializes all print mode related parameters to values previously saved.

Comment When reset to the previously saved values, the current line is set to the top–of–form position. Print mode, line spacing, international language selection, form length, skip–over perforation, and character pitch are reset to previously saved values. (In the Serial Matrix protocol, this command sets horizontal tabs at every eighth char- acter column.) Character–by–character and line–by–line attributes are canceled. The vertical format unit is cleared. Interface parameters and emulation mode (P–Se- ries or Serial Matrix) are not affected.

6–56 Programming