Printronix P3000 Series manual Control Code Reference Index, Format Function Series Serial

Control Code Reference Index

The following index lists the control codes by function and lists the ASCII mnemonic and page num- ber. Alphabetical listings by mnemonic and function are provided in Appendix D.

NOTE: Some control code functions can be accomplished using another control code se- quence or via control panel selection.

	PAPER MOTION
FUNCTION	P–SERIES	SERIAL	PAGE NO.
Form Feed	FF	FF	6–40
Line Feed	LF	LF	6–45
Line Feed n/216 Inch (1 line only)	N/A	ESC J	6–46
Vertical Tab	VT	VT	6–68

	FORMAT
FUNCTION	P–SERIES	SERIAL	PAGE NO.
Backspace	BS	BS	6–7
Cancel	N/A	CAN	6–15
Carriage Return	CR	CR	6–16
Delete	N/A	DEL	6–30
Forms Length Set (Inches)	SFCC INCHES	ESC C NUL	6–41
Forms Length Set (Lines)	SFCC LINES	ESC C	6–42
Horizontal Tab	N/A	HT	6–43
Horizontal Tab Set	N/A	ESC D	6–44
Line Spacing 1/6 Inch (6 lpi)	SFCC 2	ESC 2	6–47
	SFCC LPI
Line Spacing 1/8 Inch (8 lpi)	SFCC 0	ESC 0	6–48
	SFCC LPI
Line Spacing 8 or 10.3 lpi (1 line only)	ACK	N/A	6–49
	SFCC f
Line Spacing 7/72 Inch	SFCC 1	ESC 1	6–50
Line Spacing n/72 Inch	SFCC A	ESC A	6–51
(as executed by ESC 2)
Line Spacing n/216 Inch	SFCC 3	ESC 3	6–52
Skip–Over Perforation	N/A	ESC N	6–62
Skip–Over Perforation Cancel	N/A	ESC O	6–63
VFU Commands (P–Series)	DLE–US	N/A	6–67
Vertical Tab Set/Clear (Serial Matrix)	N/A	ESC B	6–69

6–4 Programming