Procom EVS200 user manual Antenna connection, Af Out, RS-232-Interface

VOR/ILS Analyzer EVS200

Chapter 2: Preparation for Operation

Connection of Signal/Control Inputs/Outputs

Antenna connection

Via the RF INPUT at the frontside the VOR/ILS Analyzer EVS200 can be connected with a receiver antenna which agrees to frequency range.

As an option a RF input at the unit’s rear side is possible.

AF OUT

Via the AF OUT at the frontside the demodulated AF signal will be output.

￿ AF signal	bandwidth:	300 Hz to 4 kHz
	output level:	approx.: 200 mVrms / 50 Ω / by 50% AM part

e.g. VOR/ILS Analyzer ￿=oscilloscope

RS-232-Interface

Via the RS-232-Interfaceat the rearside all essential unit functions of the VOR/ILS Analyzer EVS200 can be remote controlled with a PC terminal. For that purpose the unit can be operated with commercial terminal programs (e.g. Telix, Procomm, etc.)

0796.1800.02 E-8 9