Command AF6 Function, Command AF7 Funktion | Procom EVS200 instruction

VOR/ILS Analyzer EVS200

				Chapter 3: Operation
Command AF6

command		function
AF6	<AF-frequency range F3>	query of AF-frequency 400 Hz

The command AF6 reads the actual AM frequency (F3) in the BEACON mode.
Example:
	command from the controller	response of the VOR/ILS Analyzer EVS200
query:	AF6 <CR>	e.g.	400.0Hz <CR/LF>
	af6 <CR>	e.g.	400.0Hz <CR/LF>

Command AF7

command		Funktion
AF7	<AF-Frequenz ID>	query of AF-frequency ID

The command AF7 reads the actual AF frequency (ID) in the BEACON mode.
Example:
	command from the controller	response of the VOR/ILS Analyzer EVS200
query:	AF7 <CR>	e.g.	1020.0Hz <CR/LF>
	af7 <CR>	e.g.	1020.0Hz <CR/LF>

0796.1800.02

E-8

52

Image 61

Procom EVS200 user manual Command AF6 Function, Command AF7 Funktion, Query of AF-frequency ID

Contents

VOR/ILS Analyzer EVS200 VOR/ILS Analyzer EVS200 Issue Version E8 EVS200 0201796.1800.02 Rohde & Schwarz GmbH & Co. KGPage Safety Instructions Safety Instructions Operator Information ContentsPreparation for Operation Operation RS-232-Interface operation Interfaces Technical Specification ServiceService Warranty Technical data General data Accessories Operator Information Important operator information Unpack the VOR/ILS Analyzer EVS200 Unpacking Application of the unit Characteristics of the unit Unit layout frontview Unit layout rearview Placing the unit Safety RulesPreparation for Operation Mains connection Assembling the FO Cable Jack Cable specification FO cable jack AF OUT Antenna connectionRS-232-Interface Preparation for Operation External AF input SetupDSP output ILS-Mode VOR-Mode Display Switch On/switch Off the unit at VDC supply Switch On/switch Off the unit at mains supplySwitch on procedure Operation Operation Selftest Bite Battery operation Displ 2/2 Parameter Description Setting value SETUP-Mode Operation Operating instructions of SETUP-Mode Operating instructions of ILS-Mode ILS-Mode Operation Operating instructions of Y /t setup menu Operation Operating instructions of Store DDM menu Operation Displ 1/2 Signal parameters on ILS displayDispl 2/2 Store Operating instructions of VOR-Mode VOR-Mode Signal parameters on VOR display Operating instructions of BEACON-Mode BEACON-Mode Display indication Description Measuring value Signal parameters on Beacon display Operating instructions of Δ Level-Mode Level-Mode Operation Storing and recalling reference levels VOR/ILS Analyzer EVS200 Signal parameters on Δ Level Display Operating instructions of Spectrum-Mode Spectrum-Mode RS-232-Interface operation Control commandsCOM-Parameter Handshake Command RF frequency in kHz Function Unit related control commandsCommand LO Function Command EC0 Function Command test Function Command EC1 FunctionCommand LA Function EC1 Command BI Function Command RES FunctionRES Reset Rescr Ready CR/LF Command ML Function Command VER FunctionCommand MV Function ML Mode-Delta Level Level mode setting Command MI Function Mode related control commands ILS-ModeCommand MB Function Command DD0 Function Command SD0 Function Command DD1 FunctionCommand SD1 Function DD1 Command AM3 Function Command AM2 FunctionCommand PH Function Phase 90/150 Hz Query of Phase angle 90/150 Hz Command BW1 Function Command BW0 FunctionBW0 bandwidth information KHz bandwidth setting BW1 bandwidth information KHz bandwidth setting OFF Command FA1 Function Modulation depth Command FA2 Function AM90 CR , AM 150 CR Command FA3 FunctionExample CR DDM CR RF level Command D1 Function Command FA0 FunctionCommand D2 Function D1 display information Switch over to display1 Command AM8 Function Command AF8 FunctionCommand AM9 Function AF8 AF-frequency ID AF-frequency ID query Command AM0 Function Command be FuncionCommand AM1 Function VOR-Mode Command FM1 Function Command FM0 FunctionFM0 FM1 D2 Display-information Switching over to Display2 FM-deviation FA2 Fast measuring on Activating the Fast measurement modeFM-Index Example Command from the controller Input e.g. a FA3 Fast measuring on Activating the Fast measurement mode Command LR Function Command SR FunctionCommand LD Function Level-Mode Command AM5 Function Command AM4 FunctionCommand AM6 Function Beacon-Mode Command AF4 Function Command AM7 Kommando FunktionCommand AF5 Function Command AF7 Funktion Command AF6 FunctionAF6 AF7 Interfaces RS-232-Interface Labeling Description Interfaces External AF input Labeling DescriptionExternal VDC connection Mains connection Labeling Description Service ILS signal analysis Technical dataReceiver section VOR signal analysis Dimensions and Weight Temperature rangeEMC Order notification Accessories Description Ident No