Procom EVS200 user manual Command FM0 Function, Command FM1 Function

VOR/ILS Analyzer EVS200

Chapter 3: Operation

Command FM0

command		function
FM0	<FM-deviation)>	FM-deviation query
The command FM0 reads the actual FM-deviation value in the VOR mode.
Example:
	command from the controller	response of the VOR/ILS Analyzer EVS200
query:	FM0 <CR>	e.g.	479.1Hz <CR/LF>
	fm0 <CR>	e.g.	479.1Hz <CR/LF>

Command FM1

command		function
FM1	<FM-Index)>	query of FM-index value
The command FM1 reads the actual FM-index value in the VOR mode.
Example:
	command from the controller	response of the VOR/ILS Analyzer EVS200
query:	FM1 <CR>	e.g.	15.9 <CR/LF>
	fm1 <CR>	e.g.	15.9 <CR/LF>

Command D1

command	function
D1 <Display-information>	switching over to Display1

The command D1 enables the switching over to the content of display1 in the VOR / ILS mode.

This is the prediction for reading out the data of the corresponding mode (VOR/ILS).

Example:
	command from the controller	response of the VOR/ILS Analyzer EVS200
input:	D1 <CR>	READY <CR/LF>
	d1 <CR>	READY <CR/LF>

0796.1800.02 E-8 45