Procom EVS200 user manual Contents, Operator Information, Preparation for Operation

VOR/ILS Analyzer EVS200

Contents

Contents

Chapter Page

1.Operator Information

-	Important operator information	1
-	Unpacking	2
- Application of the unit		3
- Characteristics of the unit		4
-	Unit layout frontview	5
-	Unit layout rearview	6

2.Preparation for Operation

-	Placing the unit		7
-	Mains operation		7
	-	Mains connection	7
-	DC connection		8
	- Assembling the FO Cable Jack		8
	- Finishing and connection to the Vehicle Board Supply		8
- Connection of Signal/Control Inputs/Outputs			9
	-	Antenna connection	9
	-	AF OUT	9
	-	RS-232-Interface	9
	-	External AF input	10
	-	DSP output	10

3.Operation

- Switch On/switch Off the unit at mains supply		11
- Switch On/switch Off the unit at VDC supply		11
-	Switch on procedure	11
-	Selftest (BITE)	12
-	Battery operation	12
- Operation of the unit		13
	- General operating instructions of the VOR/ILS Analyzer EVS200	13
	- SETUP-Mode	14
	- Operating instructions of SETUP-Mode	15

0796.1800.02 E-8 0.1