VOR/ILS Analyzer EVS200
Chapter 3: Operation
SETUP-Mode
In the following table all possible parameters are listed and its functions are described. Furthermore all possible setting values per parameter are shown. Next a sequence chart of the operating instructions in the SETUP mode is following.
Changes in the SETUP can be saved
with the softkey "SAVE".
| parameter | description |
| setting value |
|
|
|
| |
| RS232 BAUDRATE | baud rate setting | 1200, 2400, 4800, | |
|
|
| 9600, 19200 | |
| VOR | 0,01° / 0,05° | ||
| DDM/SDM | factor for determining the number of | 1, 2, 4, 8, 16, 32, 64 | |
|
| measurements which form the arithmeti- |
|
|
|
| cal average |
|
|
| DDM Y / | XY value scaling in localizer mode at | RNG.1 to RNG.4 | |
|
|
|
| |
| DDM Y / | XY value scaling in glideslope mode at | RNG.1 to RNG.4 | |
|
|
|
| |
|
| AF selection for valuation | INT = internal AF | |
|
|
| EXT = external AF | |
|
|
| via | |
| STARTUP mode | startup mode setting at switching on the | VOR | (VOR mode) |
|
| unit | ILS | (ILS mode) |
|
|
| BCN | (Beacon mode) |
|
|
| SPEC | (Spectrum mode) |
|
|
| LEVEL (Δ level mode) | |
| SQUELCH | on/off switching squelch | ON / OFF | |
|
|
|
|
|
setting valid for:
-Δ level mode
-ILS mode
-VOR mode
When the setting is "ON" an automatical quiet tuning is performed as soon as the threshold level < the receiver level is.
When setting is "OFF" no quiet tuning will be performed.
DISPLAY ILLUM | display brightness setting | OFF ⇐ 1 to 6 MAX |
DDM/SDM DIMENSIONS | value of DDM/SDM indication | μA / % / 1 |
|
| (1= value without dimension) |
indication interval time | 1 to 8 | |
| setting is only valid for display indi- | |
| cation. |
|
| 1 to | 8 |
| approx. 0.4 s to approx. 1.8 s | |
tuning step rate setting | 5 / 25 / 50 / 100 (kHz) | |
0796.1800.02 | 14 |
