
Chapter 5: Configuration
Add And Edit Trigger Mapping
Edit
Tapping this button brings up the Edit mapping dialog box, so that you can edit existing trigger mappings.
Remove
Tapping this button removes an existing mapping.
OK
The OK button in the top right of the Manage Triggers screen saves all changes made. If the cancel button X is tapped instead, or the [ESC] key is pressed, all changes made will
be discarded.
5.10.2Add And Edit Trigger Mapping
This dialog box is used to add trigger mappings.
Figure 5.30 Add Mapping Menu
Source
This dropdown list allows you to specify the source of the trigger events, such as a keyboard key [F1], for the Trigger Owner selected.
Note: | It is possible to map the same source to different |
| can be mapped to both the Imager and RFID. If so, both devices/operations |
| will occur simultaneously. This is not recommended in most cases, especially |
| with devices that draw a great deal of current, such as imagers. |
| It is also possible to map different sources to the same owner. |
Add Source
Only existing trigger sources are shown in the Source
Psion Teklogix 8515 | 89 |