
Chapter 3: Getting To Know The 8515
Audio Indicators
3.7.3Audio Indicators
The 8515 beeper provides a variety of sounds and can be configured to emit a sound when a key is pressed, a keyboard character is rejected, scan input is accepted or rejected or an oper- ator’s entry does not match in a match field.
Note: | Refer to “Volume And Sound Properties” on page 81 for details about the Vol- |
| ume & Sound Properties dialog box. |
3.8Scanning
Decoded scanners must be configured by scanning special configuration bar codes. In these cases, the scanner manufacturer provides programming manuals for configuration purposes. The 8515 supports a variety of one dimensional (1D) scanners and two dimensional (2D) laser and imager scanners. “Scanning Techniques” outlines the mechanics of a successful scan. In addition, “Troubleshooting” on page 42 provides some helpful suggestions should the scan fail.
3.8.1Scanning Techniques
Note: | External scanners can be connected to the 8515 serial or USB device port. |
•Hold the scanner at an angle. Do not hold it perpendicular to the bar code.
•Do not hold the scanner directly over the bar code. In this position, light can reflect back into the scanner’s exit window and prevent a successful decode.
•Scan the entire bar code. If you are using a 1D or 2D scanner, make certain that the scan beam crosses every bar and space on the bar code, including the margins on either end of the symbol.
•If you are using a 2D imaging scanner, make certain the red,
•When using imaging scanners, do not move the scanner while decoding the bar code. Movement blurs the image.
•Hold the scanner farther away for larger bar codes.
•Hold the scanner closer for bar codes with bars that are close together.
3.8.2Scan LED Indicators
External scanners have integrated LED indicators that are not controlled by the 8515.
Psion Teklogix 8515 | 41 |