Chapter 5: Configuration
Control Panel Icons
SNMP
SNMP (Simple Network Management Protocol) is the protocol used to monitor and manage devices attached to a TCP/IP network.
Storage Manager
Allows the user to view information about the storage devices that are present, such as the CF card. For details, see page 98.
Stylus
Adjusts how Windows Embedded CE 5.0 recognizes your
Under the Calibration tab, you can recalibrate your touchscreen by tapping on the Rec- alibrate button and following the directions on the calibration screen.
System
Displays system and memory properties. Under the Memory tab, you can allocate memory between storage memory and program memory.
Teklogix Scanners
Used to set up some scanner parameters. However, the 8515 supports decoded scanners, which must be configured by scanning special configuration bar codes (see page 109).
Total Recall
This is a Psion Teklogix utility developed to maintain applications and setting over cold boots. This utility is based on a backup and restore concept and is extended to incorpo- rate powerful advanced features.
TweakIT Settings
Allows you to change Advanced System Settings (interface, network, and servers), User System Settings (display font size), and provides the Registry Editor.
Volume & Sounds
Allows you to adjust the volume of the beep that is emitted to indicate events like warn- ings, key clicks and screen taps. Sounds (wave files) cannot be played on 8515 units. The beeper volume and the conditions under which it sounds are tailored from within the application installed on your unit.
Wireless WAN
Provides access to technology like GSM/GPRS and CDMA which allows wide area networking capability such as internet browsing via GSM/GPRS.
Psion Teklogix 8515 | 69 |
