Psion Teklogix 8515 Certificate Assignment, Control Panel, choose the Certificates icon

Chapter 5: Configuration

Certificate Assignment

Trigger Type

You can enable either an Up/Down or Double Click response to a trigger press. Normally, when a trigger (keyboard key, etc.) is pressed and released, a “trigger down” event is sent to the “owner”—that is, the application receiving the trigger press information followed by a “trigger up”. If Double Click is chosen in this menu, when the trigger is pressed, released, and then pressed again, a “double-click” event is generated. If a mapping with the type Up/down has also been configured for the same source, it will only receive the first set of trigger events.

Trigger Owner

This identifies the driver or application receiving the trigger presses.

Show All

By default, inactive owners are not shown. By checking this checkbox, all owners, both active and inactive, are displayed.

5.11Certificate Assignment

•In the Control Panel, choose the Certificates icon.

Figure 5.31 Certificates Icon

This dialog box is used in conjunction with 802.1X authentication to enhance 8515 security.

90Psion Teklogix 8515 Vehicle-Mount Computer User Manual