
Chapter 2: Basic Checkout
SCU Tabs
When you tap on the config you created, the Summit
-Associate to the SSID.
-Authenticate to the network.
-If EAP authentication is being used, derive dynamic encryption keys.
-If DHCP is being used by the network, obtain an IP address.
If the Summit
•Tap on the Status tab.
The Status dialog box lists the IP and MAC address, and indicates the current state of the radio, the signal strength, channel etc.
You can also use the Status screen for DHCP renewal and ICMP Echo Requests (Pings).
Important: For details about the Status dialog box, refer to “Status Tab” on page 28.
2.9SCU Tabs
This section provides a detailed description of each of the tabs available in the
2.9.1Main Tab
The Main tab is displayed when you tap on Start>Programs>Summit>SCU.
Figure 2.13 SCU Main Menu
•Enable/Disable Radio: Enables or disables the radio. This a toggle button; when the radio is enabled, this button reads Disable Radio, and when the radio is disabled, it reads Enable Radio.
20Psion Teklogix 8515