Chapter 2: Basic Checkout

Assigning The IP Address

Note:

You do not need to reset your 8515 after configuring the Summit DC 802.11

 

SC (Model RA2041) CF radio.

2.8.1Assigning The IP Address

Before launching the SCU, you need to configure how the IP address will be obtained.

•Tap on Start>Settings>Network and Dial-up Connections.

Follow the steps under the heading “Assigning An IP Address” on page 15 to determine how the IP address will be obtained—either via DHCP or by specifying an address.

2.8.2Using The SCU To Connect To The WLAN

This section provides a quick set of steps to create a profile (referred to as a config). Detailed information about each of the SCU tabs—Main, Config, Status, Diags and Global Set- tings—is provided under “SCU Tabs” beginning on page 20.

To launch the SCU so that your vehicle-mount can connect to a wireless LAN:

• Tap on Start>Programs>Summit>SCU.

Figure 2.11 SCU Main Menu

•Tap on the Config tab.

Figure 2.12 SCU Configuration Menu

Radio

Attributes

18Psion Teklogix 8515 Vehicle-Mount Computer User Manual

Page 37 Page 39
Page 38
Image 38
Psion Teklogix 8515 user manual Assigning The IP Address, Using The SCU To Connect To The Wlan, SC Model RA2041 CF radio
Page 37 Page 39
Top Page Image Contents