Psion Teklogix 8515 user manual SCU Security Capabilities

Chapter 2: Basic Checkout

Config Tab

Table 2.2 Radio Attributes Menu

Radio	Description	Value	Default
Attribute
EAP Type	Extensible Authentication Protocol	None, LEAP, EAP-FAST,	None
	type used for 802.1X authentication	PEAP-MSCHAP
	to access point.	– To use EAP-TLS, you must
		use WZC.
Credentials	Authentication credentials for the	User: Username or	None
	selected EAP type.	Domain/Username (up to 64
		characters).
	Refer to “EAP Credentials” on page	Password: up to 64 characters.
	25.	For PEAP: CA Cert–CA
		server certificate filename.
Encryption	Type of encryption used to protect	Off, Manual WEP, Auto WEP	None
	transmitted data.	(generated during EAP
		authentication), WPA-PSK,
		WPA-TKIP, WPA2-PSK,
		WPA2-TKIP, WPA2-AES,
		CCKM-TKIP.
		For Manual WEP: Up to four
		static WEP keys.
		For PSK: ASCII passphrase or
		hex PSK.

•EAP-Type & Encryption: Security settings. These settings allow you to enhance the security of data across the wireless LAN. Refer to “EAP Credentials” on page 25 and “SCU Security Capabilities” on page 23 for details about these settings.

2.9.2.1SCU Security Capabilities

The SCU provides integrated security to protect transmitted data as well as the vehicle- mount infrastructure that transmits and receives data.

A foundational element of the IEEE 802.11i WLAN security standard is IEEE 802.1X and a critical application on a mobile device is an 802.1X supplicant. This supplicant provides an interface between the radio and the operating system and supports the authentication and en- cryption elements required for 802.11i, also known as Wi-Fi Protected Access 2 (WPA2), as well as predecessors such as WPA and WEP. Summit software includes an integrated suppli- cant that supports a broad range of security capabilities, including:

Psion Teklogix 8515 Vehicle-Mount Computer User Manual 23