Q-See QT528 user manual Host Monitor, Spot

4.2.2 Host Monitor

Step 1: Enter into system configurationlive configurationhost monitor; refer to Fig 4-8:

Fig 4-8 Live Configuration-Host Monitor

Step 2: Select split mode: 1×1, 2×2, 2×3, 3×3, and channel

Step 3: Dwell time: the time interval for a certain picture display before switching to next picture display

Step 4: Select the split mode, then setup current picture group. Click button to setup the previous channel groups

of pictures, click button to set latter channel groups of pictures.

Step 5: Click “default” button to restore default settings; click “apply” button to save the settings; click “exit” button to exit current interface.

NOTE: If you have dual monitors Host monitor needs to be main monitor.

4.2.3 SPOT

Step 1: Enter into system configurationlive configurationSPOT; refer to Fig 4-9:

Fig 4-9 Live Configuration-SPOT

Step 2: Select split mode: 1×1 and channel

Step 3: Dwell time: the time interval for a certain picture display before switching to the next picture display.

Step 4: Select the split mode, then setup current picture group. Click button to setup the previous channel groups

of pictures, click button to set the latter channel groups of pictures.

Step 5: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current interface.

To activate this setting, go to the main camera screen and click on the Dwell icon (Fig 4-1). This will make the camera rotate based on the setting in Main Monitor.

19