Q-See QT528 user manual Setting up MYQ-SEE Ddns

Fig 7-7 DDNS

Setting up MYQ-SEE DDNS:

NOTE: Before you setup DDNS you must first set up Port Forwarding as directed in Section 7.3 PORT FORWARDING. Once you have enabled Port Forwarding, you can configure your DDNS information by following these steps:

a.Using a computer that is connected to the same network as your Q-See DVR, use your IE Browser to go to http://myq-see.com.

b.Click on the New User? Link at the bottom of the page (http://myq-see.com/reg.asp).

c.Complete the registration process by following the on-screen directions and click the [Submit] button at the bottom of your screen (Fig 7-8).

53