Q-See QT528 user manual Time, Recycle Record

4.3.3 Time

Step 1: Enter into system configurationrecord configuration time; refer to Fig 4-13:

Fig 4-13 Record Configuration-Time

Pre-alarm record time: set the record time before event happen i.e. record time before motion detection or sensor alarm is triggered.

Post-alarm record: set the post recording time after the alarm is finished, five options: 10s, 15s, 20s, 30s and 60seconds.

Expire time: the hold time of saved records. When the set date has passed, the record files will be deleted automatically.

Step 2: User can setup all channels with same parameters, checkmark “all”, then to do relevant setup.

Step 3: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current interface.

4.3.4 Recycle Record

Step 1: Enter into system configurationrecord configurationrecycle record;

Step 2: Checkmark recycle record, the recycle record function will be enabled, it will overwrite the earlier recorded files and keep recoding when HDD is full; if not enables the DVR will stop recording when HDD is full.

Step 3: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current interface.

23