Q-See QT528 Network, Definitions and descriptions of network configuration, Static IP, PPPoE

4.6.1 Network

Step 1: Enter into system configurationnetwork configurationnetwork; refer to Fig 4-29:

Fig 4-29 Network Configuration-Network

Step 2: HTTP port: the default value is 80. If this value is changed, user needs to add the port number when typing IP

address in IE address blank .i.e. set HTTP port to 82, IP address: http://192.168.0.25, user needs to input this

address: http://192.168.0.25:82 into IE browser. Server port: communication port

Step 3: Checkmark the "Obtain IP address automatically", the device will receive IP address, subnet mask, gateway IP from the router the DVR is attached to.

Step 4: Enable PPPOE, user can directly connect the DVR to internet via ADSL, then input the user name and password; click TEST button to test the effectiveness of supplied information. You will need to get the account information from your internet service provider.

Step 5: Enable DDNS server: user needs to input user name, password and host domain name of the registered website, click TEST to test the effectiveness of information you input.

Step 6: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current interface.

3. Definitions and descriptions of network configuration:

Parameter	Meaning
HTTP port	Port to access from IE browser. The default port is 80
Server	The port number for data. The default port is 6036
port
	Static IP
IP address	The IP address of the DVR
Subnet	The subnet mask of the server
mask
Gateway	The gateway of the router
DNS	The address of DNS server
server
	PPPoE
	33