Q-See QT528 user manual 4Other settings

Fig 4-30 network configuration-email

SMTP Server/Port: the name and port number of SMTP server.

Tick off “This server requires a secure connection (SSL)”; user can setup mail servers (such as Gmail) according to actual needs,

Send address/password: sender’s email address/password

Receive address: receiver’s email address. Here user can add at least three mail addresses. Click TEST button to test the valid of the mailbox.

Attaching image amount: user can attach at least three images by one time.

4.6.4Other settings

Step1: enable DDNS server: user needs to input user name， password and host domain name of the registered website, click TEST to test the effectively of relevant information.

Fig 4-31 network configuration-other settings

STEP2: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.

Note: The domain name server that selected by user is a banding domain name of DVR. User should logon the website which provided by the server supplier to register a user name and password firstly, and then apply a domain name on line for the server. After the successful apply, user can access the server from the IE client by inputting that domain name. This DVR supports myq-see.com and www.dyndns.com DDNS services. We have included instructions for setting up DDNS access using myq-see.com in Remote Surveillance section.

Definitions and descriptions of network configuration:

35