Q-See QT528 user manual Stamp, Schedule Configuration

4.3.5 Stamp

Stamp：User can display the channel name and time stamp on video.

Step 1: Enter into system configuration record configuration stamp; refer to Fig 4-14:

Fig 4-14 Record Configuration-Stamp

Step 2: Checkmark camera name, time stamp; click Set button, user can use cursor to drag the camera name and time stamp to random positions, refer to below Figures:

Before Drag After Drag

Step 3: User can setup all channels with same parameters, checkmark “all”, then to do relevant setup.

Step 4: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current interface.

4.4 Schedule Configuration

24