Q10: How do I input password and digital numbers?
To input password and digital numbers click the box behind password or items where you need to input numbers, and then a small keyboard will appear. Please select number or letter to input (the default password is 123456), or you can use the digital keys on the front panel, or the digital keys on the remote control.
Q11: How do I upgrade the firmware on the DVR?
After you download the new firmware from the
Notice: Do not turn the system power off during the upgrade process! Doing so may damage the chipset and prevent the DVR from starting.
Q12: Why is the hard disk used in a DVR identified a new hard disk if directly used to another same type DVR? And why must we format it again?
When DVR only uses one hard disk, the hard disk removed from one to another same type DVR can work normally without format. However, when a DVR adds to a new hard disk, it will identify the hard disk as a new one and inquire whether to format no matter whether this hard disk used or not in another same type DVR before. In this condition, it can be used normally after formatted according to the guide; if two or more hard disks used in different DVRs, when used in another DVR with the same type, they will be identified to be two or more new hard disks, and all of them need to format. In general, please do not try using more disks removed from different DVRs into another one in case the data lose.
Q13: I can get a live image on the display but I can’t get the menu to display. How can I pull up the menu?
Hold down the ESC key to wait for login dialog box to appear.
Q14: I hooked up the DVR to a TV through the BNC video out port and I do not see anything on the screen. How do I get the video to display?
By default the DVR is setup to use a VGA monitor, if you want to use a TV instead then push the ESC button on the front panel and hold it until you hear a beep, if you still do not get a display then hold the ESC button down again until you hear a beep, the display should come up.
Q15: What are the minimum configurations of PC for clients connecting remotely?
PC MODULE | PARAMATERS |
|
|
CPU | Intel Celeron 2.4G |
|
|
MOTHERBOARD | Intel 845 |
|
|
HDD | 80G |
|
|
RAM | 512M |
|
|
VGA | NVIDIA GeForce MX440/FX5200 |
| ATIRADEON 7500/X300 |
OS | Windows 2000(SP4 above) /Windows XP(SP2 above) /VISTA/Win7 |
|
|
DIRECTX | 9.0 |
|
|
91
