21/2011 109 | Quatech DP500, IN5000, HD500 guide

	AirborneDirect™ Users Guide		Quatech, Inc.



		Association Retry Count	wl-assoc-retries

		Association Backoff Time (msec)	wl-assoc-backoff

		ARP Staleout Time	arp-staleout-time

		ARP Reachable Time	arp-reachable-time

		Use Directed Probes	wl-specific-scan

		Lost Association Link Timeout	wl-link-timeout

		Startup Message Mode	startup-msg

		Startup Message Text	startup-text

		WLAN DHCP Vendor Class ID String	wl-dhcp-vendorid

		Ethernet DHCP Vendor Class ID String	eth-dhcp-vendorid

		I/O Port F Bit Direction	io-dir-f

		I/O Port F Internal Pullup Resistor	io-pullup-f

		I/O Port G Direction	io-dir-g

		I/O Port G Internal Pullup Resistor	io-pullup-g

		Enable LED Signal Strength Meter	led-mode

		Enable POST LED	post-led

		Enable RF_LINK LED	rf-link-led

		Enable WLN_CFG LED	wln-cfg-led

		Enable CONN LED	conn-led

		Enable Echo for Telnet Sessions	telnet-echo

		UDP Server Ping	wl-udp-ping

100-8510-110

2/21/2011

109

Image 109

Quatech DP500, IN5000, HD500 user manual 21/2011 109

Contents

Revision February Intentionally Left Blank Quatech, Inc. Headquarters Quatech Confidential Intentionally Left Blank Contents 100 Figures Modular Approval Grant Numbers Terminology ConventionsFile Format Product Description Features Serial Device TypesEthernet Serial + Ethernet Industrial Class Enterprise Class Industrial AirborneDirect Device Heavy Duty Class AirborneDirect Users Guide ABDG-SE/ET-DP5XX Block Diagram Block Diagram ABDG-ET/SE-IN5XXX Block Diagram Power on pin Pin out and ConnectorsSerial Ports RS232 DTE Serial Ports by Product Class Ethernet Port OEM Reset Switch Factory Reset Connector DefinitionConnector Description Interface Selection Jumpers Enterprise Serial Interface Jumpers Indicator LED’s Industrial LED Indicators RF Characteristics 802.11b/g Electrical & RF SpecificationSymbol Parameter Rate Mb/s Min Absolute Maximum Values1 Band Region Freq Range No. Channels GHz Band Supported Data Rates Mb/s Performance/Range AC Electrical Characteristics TransmitterRadio Typical Performance Range Data Rate Typical Outdoor Distance Antenna Selection AntennaHost Board Mounted Antenna Host Chassis Mounted Antenna Antenna Type Features Cost Size Availability PerformanceEmbedded Antenna Embedded Antenna Options Antenna Location Performance AirborneDirect Users Guide RP-SMA Reverse Polarity SMA Mechanical Outline Enterprise ClassDB-9M Male RJ-45 Plug Serial Connector DB-9M Male Antenna Connector RP-SMA Reverse Polarity SMAPower Connector Terminal Block 2 connector Mechanical Outline Industrial Class Getting Started Attach Antenna and Power-up the AirborneDirectUnpack the AirborneDirect Device Connect AirborneDirect to host SE-IN5XXX Accessing the Web Interface Configuring Device Industrial Serial ABDG-SE-IN5XXX Opening web page shows adapter status No TCP Connection CLI Command Description Configuring Device Enterprise Serial ABDG-SE-DP5XXConnect a Host Computer Interacting with the AirborneDirect device Determine the Device’s IP address Determine and Store the Access Point SsidUart Determine Modules IP Address Accessing the Device Using Telnet Accessing the Device Using the Web Interface ET-DP5XX/IN5XXX Accessing the Web Interface Configuring Device Enterprise/Industrial Ethernet Opening web page shows adapter status ABDG-ET-DP5XX Website Login Username dpac Password dpac Using the Web Interface Title Description Navigation Bar Navigating the Website Feature Links Airborne Web Updating a Field Uploading Certificates Upload Configuration FilesUploading Certificates Uploading Configurations Updating Firmware Firmware Update Select Update Module Firmware Select MaintenanceUpdating Firmware Press Load New Firmware Step Description Express Page Setup Express Setup ConfigurationSelect Express Setup Select Radio Startup Mode Select Ethernet Static IP Configuring for Infrastructure Networks Configuring the Wireless InterfaceConfiguring for AdHoc Networks Configuring Wireless Interface Infrastructure Select Wireless LAN Channel Configuring Wireless Interface AdHocSelect Network Settings Configuring for WEP Security Configuring the Security SettingsConfiguring for WEP Security Configuring for WPA Security Configuring for WPA-PSK SecuritySelect WPA Protocol Version Select WPA/WPA2 Pre Shared Key PSK Configuring for WPA2 Security Configuring for WPA2-PSK Security Configuring for Peap Security Configuring for Peap Security Select CA Certificate Filename Configuring Dhcp on Wlan Interface Configuring Network SettingsConfiguring Dhcp Wlan Select Wlan Dhcp Configuring Dhcp Ethernet Configuring Dhcp on Ethernet Interface Configuring Static IP Wlan Configuring a Static IP Address on Wlan InterfaceSelect Wlan Static IP Address Select Subnet Mask Configuring Static IP Ethernet Configuring a Static IP Address on Ethernet InterfaceStep Select Ethernet Static IP Address XXX.XXX.XXX.XXX Configuring Serial Port for Access on Telnet Port Configuring Serial Device ServerConfigure Data Tunnel on Telnet Port Select Serial Port 1 Settings/Serial Port Configuring Serial Port 1 for Access on Tunnel PortSettings Select Serial CLI Default Mode Data Tunnel using Tunnel Port on Serial Port Configure Data Tunnel on Serial Port 1 Tunnel Port TCP Configure Data Tunnel on Serial Port 2 Tunnel Port TCP Configuring Serial Port 2 for Access on Tunnel Port Configure Serial Port 1 as TCP Client Configuring Serial Port 1 as TCP Client Configure Serial Port 2 as TCP Client Configuring Serial Port 2 as TCP Client Serial Port Install Vcom Installing and Using the Airborne VirtualCOM Driver Select Properties AirborneDirect Users Guide Replacing a Serial Cable Cable Replacement Slave Configuration Cable Replacement Master Configuration Select Outbound Transmit Type Ethernet Bridge Functionality Configuring Ethernet Adapter Public Network Interface Select Dhcp Server Enabled Ethernet Adapter interface Configuration DhcpPrivate Network Interface Ethernet Gateway IP Address. Access to Ethernet Adapter interface Configuration Static IPSelect Ethernet Gateway IP Address Select Disable from drop down menu Not be the same Web Page Overview URL Module Status Ethernet Status Ethernet Dhcp Clients Radio Statistics Ethernet Statistics Field CLI Command Express Setup Wlan Subnet Mask Wlan Settings Wlan Security Settings EAP Identity Network Settings Wlan Gateway IP Address Serial Port Settings Serial Port 2 Settings Connection Settings 21/2011 103 Ethernet Settings Wireless Routing Settings Ethernet Routing Settings Advanced Settings 108 21/2011 100-8510-110 21/2011 109 Upload Configuration File List Configuration File Delete Configuration File Active Configuration User Configuration OEM Configuration Factory Configuration WPA Configuration List Certificates Upload Certificate Delete Certificate Network Home Discover Airborne Modules Scan for Access Points Maintenance Home Update Module Firmware Reset Factory Defaults Restart Module Blink the Post LED Maintenance/Blink the Post LED Stop Blinking the Post LED Maintenance/Stop Blinking the Post LED Change Module Personality FCC Statement Certification & Regulatory ApprovalsFCC RF Exposure Statement Regulatory Approvals 25.4 FCC/IC Modular Approval Information for Canadian Users IC NoticeModular Approval Grant Numbers Country Standard Regulatory Test Mode Support Mechanical Approvals Physical & Environmental ApprovalsTest Reference Conditions Date Section Change Description Author Change Log