Quatech, Inc. |
| AirborneDirect™ User Manual | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Step |
|
| Description |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| Optional |
| Reloads the Network Settings page. Select | ||
|
| Press Reload [Button] |
| this is you have further configuration options to | ||
|
|
| change. | |||
|
|
|
|
| ||
|
|
|
|
| ||
|
| Optional |
| Restarts the device. After the device as | ||
|
| Press Restart [Button] |
| rebooted it will attempt to authenticate to the | ||
|
|
| configured network. As long as the network is | |||
|
|
|
|
| ||
|
|
|
|
| in range the wireless interface will connect. | |
|
|
|
|
| Once authenticated the network should lease | |
|
|
|
|
| an IP address to the WLAN interface and IP | |
|
|
|
|
| connectivity is possible over the WLAN | |
|
|
|
|
| network. | |
|
|
|
|
|
|
|
19.2Configuring DHCP on Ethernet Interface
DHCP enabled on the Ethernet interface is the default configuration for the serial devices. The Ethernet interface must be in client mode for this setting to be used.
The Airborne Device does not support the ability to enable DHCP on the WLAN and Ethernet interfaces simultaneously (when in client mode). Only one may have DHCP enabled at a time. The other interface must be configured to use a static IP address.
|
| Table 31 - Configuring DHCP - Ethernet | |||
|
|
|
|
|
|
| Step |
|
| Description |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| Navigation Bar |
|
| You will see a group of fields under the banner | |
| Select Configuration |
|
| of WLAN Parameters. | |
|
|
|
|
| |
|
|
|
|
|
|
| Feature Link |
|
| The wireless interface and security must be | |
| Select Ethernet Settings |
|
| configured before configuring the Ethernet | |
|
|
| settings. | ||
|
|
|
| ||
|
|
|
| A page showing the range of Ethernet options | |
|
|
|
| and fields, setting the mode of operation for | |
|
|
|
| the Ethernet interface is done in this page. | |
|
|
|
|
|
|
| Select Ethernet Role |
|
| Select Client from the drop down menu. | |
|
|
|
|
|
|
| Press Commit [Button] |
|
| Saves changes to the device. | |
|
|
|
|
|
|
| Press Reload [Button] |
|
| Reloads the Ethernet Settings page. | |
|
|
|
|
|
|
| Feature Link |
|
| The wireless interface and security must be | |
| Select Network Settings |
|
| configured before configuring the network | |
|
|
| settings. | ||
|
|
|
| ||
|
|
|
| A page showing the range of network options | |
|
|
|
| and fields, for both the WLAN and Ethernet | |
|
|
|
| interfaces, is displayed. | |
|
|
|
|
|
|
| Select Ethernet DHCP |
|
| Select Enabled from the drop down menu. | |
|
|
|
|
|
|
| Optional |
|
| Provides a method of uniquely identifying the | |
| Select WLAN DHCP Name |
| device in the DHCP lease table on the DHCP | ||
|
| server. | |||
|
|
|
| ||
|
|
|
| The default name is AirborneXXXXXX, where | |
|
|
|
| XXXXXX matches the last 6 hexadecimal digits | |
|
|
|
| of the Ethernet interface MAC address. | |
|
|
|
|
|
|
64 | 2/21/2011 |
