Quatech, Inc.

 

AirborneDirect™ User Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Step

 

 

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Feature Link

 

The target device configuration must be configured to

 

 

Select Connection Settings

 

make sure the master device connects to the correct

 

 

 

slave.

 

 

 

 

 

 

 

 

 

 

A page showing the configuration options for TCP/IP

 

 

 

 

 

and UDP connections to and from the device.

 

 

 

 

 

Configuration of Telnet, HTTP and SSH ports is

 

 

 

 

 

possible through this page.

 

 

 

 

 

 

 

Select TCP Port

 

This is the target port for the TCP connection on the

 

 

 

 

 

slave device. This should be set to the listen port

 

 

 

 

 

assigned during the configuration of the slave. The

 

 

 

 

 

default for the listen port is 8023.

 

 

 

 

 

 

 

Select TCP Timeout

 

This parameter allows the device to close the TCP

 

 

 

 

 

socket to the slave should the connection be lost. The

 

 

 

 

 

default of 0 disables the timeout.

 

 

 

 

 

The timeout setting should be based upon the period

 

 

 

 

 

of time a connection would not be used. It should at

 

 

 

 

 

least exceed the worst case of the data period.

 

 

 

 

 

 

Select Primary TCP Target Server IP Address

Enter the static IP address that was given to the slave

 

 

 

 

 

device during configuration.

 

 

 

 

 

 

 

Select Outbound Transmit Type

 

This is the outbound transmission protocol.

 

 

 

 

 

Set this to TCP from the drop down list.

 

 

 

 

 

 

 

Press Commit [Button]

 

Saves changes to the device.

 

 

 

 

 

 

 

Press Reload [Button]

 

Reloads the WLAN Settings page.

 

 

 

 

 

 

 

Optional

 

Reloads the Serial Port Settings page. Select this is

 

 

Press Reload [Button]

 

you have further configuration options to change.

 

 

 

 

 

 

 

 

 

 

 

 

Optional

 

Restarts the device. After the device as rebooted it will

 

 

Press Restart [Button]

 

create an AdHoc network with the name you gave the

 

 

 

SSID. As long as the network is in range the wireless

 

 

 

 

 

 

 

 

 

 

interface will connect.

 

 

 

 

 

 

 

80

2/21/2011

100-8510-110

Page 80
Image 80
Quatech HD500, IN5000, DP500 user manual Select Connection Settings, Select Outbound Transmit Type