Quatech HD500, IN5000, DP500 user manual Serial Port

Quatech, Inc.		AirborneDirect™ User Manual
	Step	Description
	Select Primary TCP Target Server IP Address	Enter the IP address of the primary target
	– Serial Port 2	server.
		The address must be in the format:
		XXX.XXX.XXX.XXX
	Optional	Enter the IP address of the secondary target
	Select Secondary TCP Target Server IP	server.
		The address must be in the format:
	Address – Serial Port 2
		XXX.XXX.XXX.XXX
		This address will be used if the initial
		attempts to connect to the primary server
		fail. This field is optional.
	Press Commit [Button]	Saves changes to the device.
	Press Reload [Button]	Reloads the Connection Settings page.
	Feature Link	The wireless interface and security must be
	Select Serial Port 2 Settings	configured before configuring the Ethernet
		settings.
		Displays a page showing the serial port
		configuration, setting the default mode of
		operation for the serial interface is done in
		this page.
	Select Serial CLI Default Mode	Select Pass from the drop down menu.
	Press Commit [Button]	Saves changes to the device.
	Optional	Reloads the Serial Port 2 Settings page.
	Press Reload [Button]	Select this is you have further configuration
		options to change.
	Optional	Restarts the device. After the device as
	Press Restart [Button]	rebooted it will attempt to authenticate to
		the configured network. As long as the
		network is in range the wireless interface will
		connect.
		Once authenticated to the network it the
		device will attempt to make a TCP
		connection with primary target server, using
		the configured port number.

74 2/21/2011 100-8510-110