Quatech, Inc. | AirborneDirect™ User Manual |
|
|
Pin
RJ45 Socket (Industrial)
RJ45 Plug (Enterprise)
8
Green LED
Yellow LED
NC
Valid TCP/IP connection made with Airborne Adapter:
Off No TCP/IP connection On Valid TCP/IP Connection
Off Not powered or has failed POST On Passed POST
NC
N/A
N/A
6.3Connector Definition
There are a total of five connectors used by the AirborneDirect™ family. Which connectors are available on your product depend upon the model you purchased. The definition for the connectors is common to all product classes. Table 4 provides definitions for the connectors.
Table 4 - Connector Description
Type
Description
Product Class
Serial
Ethernet
Ethernet
Antenna
Power
Power
RJ45 Plug
RJ45 Socket
2.1mm Barrel Jack
2 Position Terminal Block
Enterprise, Industrial
Enterprise
Industrial
Enterprise, Industrial
Enterprise, Industrial
Industrial
6.4OEM Reset Switch (Factory Reset)
All AirborneDirect™ devices support the ability to reset the configuration back to OEM defaults. This is useful when a device has been incorrectly configured and has lost the ability to communicate on any of the available ports, preventing access to one of the configuration interfaces and blocking your ability to recover the device by correcting the configuration.
The following Table 5 describes the sequence for OEM resetting the AirborneDirect™ devices. All devices use the same process however the loo0cation of the OEM reset switch varies between the product families.
20 | 2/21/2011 |
