Quatech HD500 Certification & Regulatory Approvals, FCC Statement, FCC RF Exposure Statement

AirborneDirect™ Users Guide Quatech, Inc.

25.0 Certification & Regulatory Approvals

The unit complies with the following agency approvals:

Table 47 - Regulatory Approvals

Country	Standard	Status
	FCC Part 15
North America	Sec. 15.107, 15.109, 15.207, 15.209, 15.247	Complete
(US & Canada)
	Modular Approval
	CISPR 16-1 :1993
Europe	ETSI EN 300 328 Part 1 V1.2.2 (2000-07)	Complete
	ETSI EN 300 328 Part 2 V1.1.1 (2000-07)
	ARIB STD-T71 v1.0, 14 (Dec 2000)
Japan	ARIB RCR STD-T33 (June 19, 1997)	Pending
	ARIB STD-T66 v2.0 (March 28, 2002)

25.1FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for assistance.

25.2FCC RF Exposure Statement

To satisfy RF exposure requirements, this device and its antenna must operate with a separation distance of a least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.

100-8510-110 2/21/2011 131