Quatech, Inc. | AirborneDirect™ User Manual |
|
|
Step
Optional
Press Restart [Button]
Description
Restarts the device. After the device as rebooted it will attempt to authenticate to the configured network. As long as the network is in range the wireless interface will connect.
Once authenticated the network will use the assigned static IP address on the WLAN interface making IP connectivity possible over the WLAN network.
19.4Configuring a Static IP Address on Ethernet Interface
This is not the default configuration for the Ethernet interface. It is important to verify the address being entered is unique to the device when on the network.
The Airborne Device does not support the ability to enable DHCP on the WLAN and Ethernet interfaces simultaneously (when in client mode). Only one may have DHCP enabled at a time, the other interface must be configured to use a static IP address.
Table 33 - Configuring Static IP - Ethernet
| Step |
|
| Description |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| Navigation Bar |
|
| You will see a group of fields under the banner |
|
| Select Configuration |
|
| of WLAN Parameters. |
|
|
|
|
|
| |
|
|
|
|
|
|
| Feature Link |
|
| The wireless interface and security must be |
|
| Select Ethernet Settings |
|
| configured before configuring the Ethernet |
|
|
|
| settings. |
| |
|
|
|
|
| |
|
|
|
| A page showing the range of Ethernet options |
|
|
|
|
| and fields, setting the mode of operation for |
|
|
|
|
| the Ethernet interface is done in this page. |
|
|
|
|
|
|
|
| Select Ethernet Role |
|
| Select Client from the drop down menu. |
|
|
|
|
|
|
|
| Press Commit [Button] |
|
| Saves changes to the device. |
|
|
|
|
|
|
|
| Press Reload [Button] |
|
| Reloads the Ethernet Settings page. |
|
|
|
|
|
|
|
| Feature Link |
|
| The wireless interface and security must be |
|
| Select Network Settings |
|
| configured before configuring the network |
|
|
|
| settings. |
| |
|
|
|
|
| |
|
|
|
| A page showing the range of network options |
|
|
|
|
| and fields, for both the WLAN and Ethernet |
|
|
|
|
| interfaces, is displayed. |
|
|
|
|
|
|
|
| Select Ethernet DHCP |
|
| Select Disable from the drop down menu. |
|
|
|
|
|
|
|
| Select Ethernet Static IP Address |
|
| Enter the assigned static IP address. |
|
|
|
|
| The address must be in the format: |
|
|
|
|
| XXX.XXX.XXX.XXX |
|
|
|
|
|
|
|
| Select Ethernet Subnet Mask |
|
| Enter the subnet mask for the network. |
|
|
|
|
| The mask must be in the format: |
|
|
|
|
| XXX.XXX.XXX.XXX |
|
|
|
|
|
|
|
66 | 2/21/2011 |
