Quatech HD500 Configuring a Static IP Address on Wlan Interface, Configuring Static IP Wlan

AirborneDirect™ Users Guide		Quatech, Inc.
	Step	Description
	Press Commit [Button]	Saves changes to the device.
	Optional	Reloads the Network Settings page. Select
	Press Reload [Button]	this is you have further configuration options to
		change.
	Optional	Restarts the device. After the device as
	Press Restart [Button]	rebooted it will attempt to authenticate to the
		configured network. As long as the network is
		in range the wireless interface will connect.
		Once authenticated the network should lease
		an IP address to the WLAN interface and IP
		connectivity is possible over the WLAN
		network.

19.3Configuring a Static IP Address on WLAN Interface

Static IP addresses on the WLAN interface is the default configuration for serial devices. It is important to verify the address being entered is unique to the device when on the network.

Table 32 - Configuring Static IP - WLAN
Step	Description
Navigation Bar	You will see a group of fields under the banner
Select Configuration	of WLAN Parameters.
Feature Link	The wireless interface and security must be
Select Network Settings	configured before configuring the network
	settings.
	A page showing the range of network options
	and fields, for both the WLAN and Ethernet
	interfaces, is displayed.
Select WLAN DHCP	Select Disable from the drop down menu.
Select WLAN Static IP Address	Enter the assigned static IP address.
	The address must be in the format:
	XXX.XXX.XXX.XXX
Select Subnet Mask	Enter the subnet mask for the network.
	The mask must be in the format:
	XXX.XXX.XXX.XXX
Select Gateway IP Address	Enter the assigned Gateway IP address.
	The address must be in the format:
	XXX.XXX.XXX.XXX
Press Commit [Button]	Saves changes to the device.
Optional	Reloads the Network Settings page. Select
Press Reload [Button]	this is you have further configuration options to
	change.

100-8510-110 2/21/2011 65