21/2011 103 | Quatech DP500, IN5000, HD500 specs

	AirborneDirect™ Users Guide				Quatech, Inc.



			Tunnel Mode		wl-tunnel-mode, wl-tunnel-mode-p1

			TCP Port		wl-tcp-port, wl-tcp-port-p1


			TCP Timeout		wl-tcp-timeout, wl-tcp-timeout-p1


			TCP Retry Time		wl-retry-time, wl-retry-time-p1


			Primary TCP Target Server IP Address		wl-tcp-ip, wl-tcp-ip-p1


			Secondary TCP Target Server IP Address		wl-tcp-ip2, wl-tcp-ip2-p1


			UDP Port		wl-udp-port, wl-udp-port-p1


			UDP Receive Port		wl-udp-rxport, wl-udp-rxport-p1


			UDP Target Server IP Address		wl-udp-ip, wl-udp-ip-p1


			UDP Transmit Mode		wl-udp-xmit, wl-udp-xmit-p1


			Outbound Transmit Type		wl-xmit-type, wl-xmit-type-p1


			Tunnel Enabled – Serial Port 2		wl-tunnel-p2


			Tunnel Port – Serial Port 2		wl-tunnel-port-p2


			Tunnel Mode – Serial Port 2		wl-tunnel-mode-p2


			TCP Port – Serial Port 2		wl-tcp-port-p2


			TCP Timeout – Serial Port 2		wl-tcp-timeout-p2


			TCP Retry Time – Serial Port 2		wl-retry-time-p2


			Primary TCP Target Server IP Address – Serial Port 2		wl-tcp-ip-p2


			Secondary TCP Target Server IP Address – Serial Port 2		wl-tcp-ip2-p2


			UDP Port – Serial Port 2		wl-udp-port-p2


			UDP Receive Port – Serial Port 2		wl-udp-rxport-p2


			UDP Target Server IP Address – Serial Port 2		wl-udp-ip-p2


			UDP Transmit Mode – Serial Port 2		wl-udp-xmit-p2


			Outbound Transmit Type – Serial Port 2		wl-xmit-type-p2


			HTTP Port Accessible via Wireless		http-port


			Telnet Port Accessible via Wireless		telnet-port


			SSH Port Accessible via Wireless		ssh-port


			Web Server Port		wl-http-port


			Telnet Port		wl-telnet-port


			Telnet Timeout		wl-telnet-timeout


			Secure Shell Server Port		wl-ssh-port

100-8510-110

2/21/2011

103

Image 103

Quatech DP500, IN5000, HD500 user manual 21/2011 103

Contents

Revision February Intentionally Left Blank Quatech, Inc. Headquarters Quatech Confidential Intentionally Left Blank Contents 100 Figures Modular Approval Grant Numbers Terminology ConventionsFile Format Product Description Features Serial + Ethernet Device TypesSerial Ethernet Industrial Class Enterprise Class Industrial AirborneDirect Device Heavy Duty Class AirborneDirect Users Guide ABDG-SE/ET-DP5XX Block Diagram Block Diagram ABDG-ET/SE-IN5XXX Block Diagram RS232 DTE Pin out and ConnectorsPower on pin Serial Ports Serial Ports by Product Class Ethernet Port OEM Reset Switch Factory Reset Connector DefinitionConnector Description Interface Selection Jumpers Enterprise Serial Interface Jumpers Indicator LED’s Industrial LED Indicators Absolute Maximum Values1 Electrical & RF SpecificationRF Characteristics 802.11b/g Symbol Parameter Rate Mb/s Min Band Region Freq Range No. Channels GHz Band Supported Data Rates Mb/s Data Rate Typical Outdoor Distance AC Electrical Characteristics TransmitterPerformance/Range Radio Typical Performance Range Antenna Selection AntennaHost Board Mounted Antenna Embedded Antenna Options Antenna Type Features Cost Size Availability PerformanceHost Chassis Mounted Antenna Embedded Antenna Antenna Location Performance AirborneDirect Users Guide RJ-45 Plug Mechanical Outline Enterprise ClassRP-SMA Reverse Polarity SMA DB-9M Male Mechanical Outline Industrial Class Antenna Connector RP-SMA Reverse Polarity SMASerial Connector DB-9M Male Power Connector Terminal Block 2 connector Connect AirborneDirect to host Attach Antenna and Power-up the AirborneDirectGetting Started Unpack the AirborneDirect Device SE-IN5XXX Accessing the Web Interface Configuring Device Industrial Serial ABDG-SE-IN5XXX Opening web page shows adapter status No TCP Connection Interacting with the AirborneDirect device Configuring Device Enterprise Serial ABDG-SE-DP5XXCLI Command Description Connect a Host Computer Determine the Device’s IP address Determine and Store the Access Point SsidUart Determine Modules IP Address Accessing the Device Using Telnet Accessing the Device Using the Web Interface ET-DP5XX/IN5XXX Accessing the Web Interface Configuring Device Enterprise/Industrial Ethernet Opening web page shows adapter status ABDG-ET-DP5XX Website Login Username dpac Password dpac Using the Web Interface Title Description Navigation Bar Navigating the Website Feature Links Airborne Web Updating a Field Uploading Certificates Upload Configuration FilesUploading Certificates Uploading Configurations Updating Firmware Firmware Update Select Update Module Firmware Select MaintenanceUpdating Firmware Press Load New Firmware Step Description Express Page Setup Express Setup ConfigurationSelect Express Setup Select Radio Startup Mode Select Ethernet Static IP Configuring Wireless Interface Infrastructure Configuring the Wireless InterfaceConfiguring for Infrastructure Networks Configuring for AdHoc Networks Select Wireless LAN Channel Configuring Wireless Interface AdHocSelect Network Settings Configuring for WEP Security Configuring the Security SettingsConfiguring for WEP Security Select WPA/WPA2 Pre Shared Key PSK Configuring for WPA-PSK SecurityConfiguring for WPA Security Select WPA Protocol Version Configuring for WPA2 Security Configuring for WPA2-PSK Security Configuring for Peap Security Configuring for Peap Security Select CA Certificate Filename Select Wlan Dhcp Configuring Network SettingsConfiguring Dhcp on Wlan Interface Configuring Dhcp Wlan Configuring Dhcp Ethernet Configuring Dhcp on Ethernet Interface Select Subnet Mask Configuring a Static IP Address on Wlan InterfaceConfiguring Static IP Wlan Select Wlan Static IP Address Select Ethernet Static IP Address Configuring a Static IP Address on Ethernet InterfaceConfiguring Static IP Ethernet Step XXX.XXX.XXX.XXX Configuring Serial Port for Access on Telnet Port Configuring Serial Device ServerConfigure Data Tunnel on Telnet Port Select Serial CLI Default Mode Configuring Serial Port 1 for Access on Tunnel PortSelect Serial Port 1 Settings/Serial Port Settings Data Tunnel using Tunnel Port on Serial Port Configure Data Tunnel on Serial Port 1 Tunnel Port TCP Configure Data Tunnel on Serial Port 2 Tunnel Port TCP Configuring Serial Port 2 for Access on Tunnel Port Configure Serial Port 1 as TCP Client Configuring Serial Port 1 as TCP Client Configure Serial Port 2 as TCP Client Configuring Serial Port 2 as TCP Client Serial Port Install Vcom Installing and Using the Airborne VirtualCOM Driver Select Properties AirborneDirect Users Guide Replacing a Serial Cable Cable Replacement Slave Configuration Cable Replacement Master Configuration Select Outbound Transmit Type Ethernet Bridge Functionality Configuring Ethernet Adapter Public Network Interface Select Dhcp Server Enabled Ethernet Adapter interface Configuration DhcpPrivate Network Interface Ethernet Gateway IP Address. Access to Ethernet Adapter interface Configuration Static IPSelect Ethernet Gateway IP Address Select Disable from drop down menu Not be the same Web Page Overview URL Module Status Ethernet Status Ethernet Dhcp Clients Radio Statistics Ethernet Statistics Field CLI Command Express Setup Wlan Subnet Mask Wlan Settings Wlan Security Settings EAP Identity Network Settings Wlan Gateway IP Address Serial Port Settings Serial Port 2 Settings Connection Settings 21/2011 103 Ethernet Settings Wireless Routing Settings Ethernet Routing Settings Advanced Settings 108 21/2011 100-8510-110 21/2011 109 Upload Configuration File List Configuration File Delete Configuration File Active Configuration User Configuration OEM Configuration Factory Configuration WPA Configuration List Certificates Upload Certificate Delete Certificate Network Home Discover Airborne Modules Scan for Access Points Maintenance Home Update Module Firmware Reset Factory Defaults Restart Module Blink the Post LED Maintenance/Blink the Post LED Stop Blinking the Post LED Maintenance/Stop Blinking the Post LED Change Module Personality Regulatory Approvals Certification & Regulatory ApprovalsFCC Statement FCC RF Exposure Statement Country Standard Information for Canadian Users IC Notice25.4 FCC/IC Modular Approval Modular Approval Grant Numbers Regulatory Test Mode Support Mechanical Approvals Physical & Environmental ApprovalsTest Reference Conditions Date Section Change Description Author Change Log