Quatech DP500, IN5000, HD500 user manual Ethernet Port, Serial Ports by Product Class

AirborneDirect™ Users Guide Quatech, Inc.

Table 2 - Serial Ports by Product Class

Device Class

Port 1

Port 2

Enterprise

Industrial

RS232

RS422 (4-wire)

RS485 (2-wire)

RS232

RS422 (4-wire)

RS485(2-wire)

RS232

RS422 (4-wire)

RS485(2-wire)

N/A

N/A

RS232

RS422 (4-wire)

The Port 1 and Port 2 interfaces support the following configurations:

BAUD: 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400, 460800, 921600

Flow Control: None, Hardware (CTS/RTS), Software (XON/XOFF)

Port 1 Default settings: 9600, 8, N, 1, No Flow Control.

Port 2 Default settings: 9600, 8, N, 1, No Flow Control.

6.2Ethernet Port

The AirborneDirect™ Ethernet devices support a single interface. This is a 10/100Mbps interface that supports auto negotiation and cross-over cabling. The interface also supports both half and full duplex for 10Mbps and 100Mbps. Table XX shows the interface pin out.

Figure 7 - Ethernet Jack Pin Out

Table 3 - Ethernet Connector Pin Out

Pin

RJ45 Socket (Industrial)

RJ45 Plug (Enterprise)

1

2

3

4

5

6

7

TxD+

TxD-

RxD+

NC

NC

RxD-

NC

RxD+

RxD-

TxD+

NC

NC

TxD-

NC

100-8510-110 2/21/2011 19