Quatech HD500, IN5000, DP500 user manual Industrial LED Indicators

AirborneDirect™ Users Guide					Quatech, Inc.
			Table 7 - Industrial LED Indicators
	LED	Color			Airborne Device State
	POWER			Adapter is not powered.
				Adapter is powered.
	POST			Adapter is not powered.
				Adapter failed Power On Self Test (POST) and is not
				configured for wireless communication.
				Adapter passed POST but is not configured for wireless
				network communication.
				Adapter passed post and is configured for wireless
				communication.
	LINK			Adapter is not powered.
				(Periodic Blinking) Adapter is searching for a valid network
				(Access Point) that matches device’s configuration.
				Adapter has successfully associated with an Access Point.
	COMM			If Power LED is also Off then Adapter is not powered.
				If Power LED is On then:
				∙	No TCP session from WLAN or Ethernet interface has
					been established.
				A TCP connection to the adapter has been established from
				the Wireless or Ethernet interfaces but no traffic has been
				detected.

100-8510-110 2/21/2011 23