RCA RC5220P DVD Player + TV without Audio/Video Input Jacks (Antenna Jack Only)

8
Setup and Connections
RF Output Adapter Required
You must buy an RF Output Adapter
to use this connection. You can
order your RF Output Adapter on
page 89, or buy one at your local
electronics store.
CAUTION
Do not stack electronic components or other
objects on top of the DVD Player. See Safety
Information on the inside front cover.
DVD Player + TV without Audio/Video Input Jacks
(Antenna Jack Only)
1. Insert the RF output adapter into the RF ADAPTER jack on the back of your DVD Player.
2. Connect the coaxial cable from your cable or off-air signal to the Antenna Input jack on the RF output adapter.
3. Connect another coaxial cable to the Antenna Input jack on the back of your TV and to the RF output adapter.
4. Connect the AC power cord to the AC IN jack on the back of your DVD Player, and plug the other end into an AC
outlet.
5. Turn on your TV.
6. Turn your TV to the RF Output Adapter’s output channel (the adapter should have a CH 3/4 switch on it that
indicates which channel to use on your TV.)
7. Turn on your DVD Player.