Setup and Connections
5
CAUTION
Protect your components from overheating.
Do not stack electronic components or
other objects on top of the DVD Player.
Do not block ventilation holes in any of
the components. Arrange the components
so that air can circulate freely.
Allow adequate ventilation when
placing your components in a stand.
See Safety Information on the inside front
cover.

Protect Components from Power Surges

Connect all components before plugging any power cords into
the wall outlet.
Always turn off the DVD Player, TV, and other components
before you connect or disconnect any cables.

Position Cables Correctly to Avoid Audio

Hum or Interference

Insert all cable plugs firmly into their jacks.
Place the audio/video cables to the sides of the TV’s back panel
instead of straight down the middle after you connect your
components.
Try not to coil any twin-lead cables and keep them away from the
audio/video cables as much as possible.
Make sure all antennas and cables are properly grounded.
Types of Discs the Player Can Play
This DVD Player is capable of playing the following types of discs
with the corresponding logos.
Audio CDsDigital Video Discs
DO NOT Use CD-R Discs!
The wavelength of the pickup of this DVD
Player may cause CD-R discs to be erased. DO
NOT play CD-R discs in this player!