Setup and Connections
7
CAUTION
Do not stack electronic
components or other objects on
top of the DVD Player. See Safety
Information on the inside front
cover.
DVD Player + TV with Audio/Video Input Jacks
1. Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of your DVD
Player, and to the corresponding Audio Input jacks on your TV.
2. Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD Player, and to the Video Input
jack on your TV.
3. If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO OUT jack on the back of your
DVD Player and to the S-Video jack on your TV. If your TV doesn’t have an S-VIDEO jack, skip this step.
4. Connect the AC power cord to the AC IN jack on the back of your DVD Player, and plug the other end into an AC
outlet.
5. Turn on your TV and tune it to the Video Input Channel. (If you don’t know what channel is the Video Input
Channel, please see page 13.)
6. Turn on your DVD Player.
Note:
Your cable or off-air connection to the television should not be affected by this connection. Connect your cable or off-air antenna to
your television as you normally would. You may need to consult your television manual for details.