Making Printer Settings Using the Control Panel

Maintenance menu parameters

This section explains about parameters that can be set on the Maintenance menu.

Quality MaintenanceColor Registration

You can specify Auto Adjust or Fuser Adjust for this feature.

Color Calibration

You can adjust the gradation of bright (highlighted parts) and medium areas (middle parts) for printing.

Adjust Auto Density

You can print the gradation of auto density.

Print Sheet 1

 

 

You can print gradation correction sheet 1.

5

 

Print Sheet 2

 

 

 

You can print gradation correction sheet 2.

 

Reset Setting

 

 

You can reset the gradation correction value to default.

Reference

For details, see “Correcting the Color Gradation”, Hardware Guide.

Registration

You can adjust the starting position of the printing page.

Print Test Sheet

You can print the registration test sheet.

Tray 1, Tray 2, Tray 3, Bypass Tray, Duplex Back Side

Note

Only the installed trays appear on the display panel.

Adjustment

You can select the start position for printing on a page.

Horizontal : Tray 1, Horizontal : Tray 2, Horizontal : Tray 3, Horizontal :

Bypass Tray, Horizontal : Duplex Back, Vertical : Tray 1, Vertical : Tray 2,

Vertical : Tray 3, Vertical : Bypass Tray, Vertical : Duplex Back

Note

Only the installed trays appear on the display panel.

4 Color Graphic Mode

This mode adjusts levels of toner color overlap. If characters or lines blur, select- ing [Text Priority] may make them clearer. Select [Photo Priority] for normal use.

Note

Default: Photo Priority

158