Ricoh 220-240 V ❖View Protocol, ❖Comment settings, ❖Deleting Comment, msh> smb protocol, ❖Deleting Group Name, msh> smb clear group, msh> slp ttl “ttl_val”

Remote Maintenance by telnet

slp

Use “slp” command to view and configure SLP settings.

msh> slp ttl “ttl_val”

•You can search the NetWare server using SLP in the PureIP environment of NetWare 5/5.1 and Netware 6/6.5. Using the “slp” command, you can con- figure the value of TTL which can be used by SLP multicast packet.

•The default value of TTL is 1. A search is executed only within a local seg- ment. If the router does not support multicast, the settings are not available even if the TTL value is increased.

•The acceptable TTL value is between 1 and 255.

smb

Use the “smb” command to configure or delete the computer or workgroup name for SMB.

❖Computer Name settings

msh> smb comp “computer name” 6

•Set computer name using up to 15 characters. Names beginning with “RNP” or “rnp” cannot be entered.

❖Working Group Name settingsmsh> smb group “work group name”

•Set workgroup name using up to 15 characters

❖Comment settingsmsh> smb comment “comment”

•Set comment using up to 31 characters

❖Notify print job completionmsh> smb notif {on off}

•To notify print job completion, specify “on”. Otherwise, specify “off”

❖Deleting Computer Name msh> smb clear comp

❖Deleting Group Namemsh> smb clear group❖Deleting Commentmsh> smb clear comment❖View Protocol

msh> smb protocol 239