Making Printer Settings Using the Control Panel

Security Method

You can enable or disable encryption. You can also specify the security type when the encryption is enabled.

Off

WEP

Hex:10/26,ASCII:5/13 Digits

WPA

Encryption Method (TKIP, COMP(AES)), Authentication Method (WPA-PSK, WPA(802.1X))

 

Note

 

Default: Off

 

The WEP key can be entered using a hexadecimal number or an ASCII

 

character sequence.

 

The WPA-PSK can be entered using an ASCII character sequence.

 

When using 64 bit WEP, up to 10 hexadecimal or 5 ASCII characters can

5

be entered. When using 128 bit WEP, up to 26 hexadecimal or 13 ASCII

characters can be entered.

The WEP key can also be set using Web Image Monitor. For details, see Web Image Monitor Help.

Wireless LAN Signal

You can check the signal strength when using LAN.

Communication Speed

You can select the transmission speed for IEEE 802.11b.

Auto

11Mbps Fixed

5.5Mbps Fixed

2Mbps Fixed

1Mbps Fixed

Note

Default: Auto

Restore Defaults

Reset the wireless LAN to default.

USB Setting

You can make setting for USB Host interface.

This menu appears only when the optional USB Host interface unit is installed.

Auto

Full Speed

Note

Default: Auto

188