Preparing for Printing

Installing the PostScript 3 Printer Driver (Windows 2000 - TCP/IP)

1

Important

Installing this printer driver requires Administrators permission. Log on us-

 

ing an account that has Administrators permission.

A Quit all applications currently running.

B Insert the CD-ROM into the CD-ROM drive.

The installer starts.

C Select an interface language, and then click [OK].

The default interface language is English.

D Click [PostScript 3 Printer Driver].

Add Printer Wizard starts.

E Click [Next >].

F Click [Local printer], and then click [next >].G Click [Create a new port...].

H Click [DeskTopBinder-SmartDeviceMonitor], and then click [Next >]. I Click [TCP/IP], and then click [Search].

A list of printers using TCP/IP appears.

J Select the printer you want to use, and then click [OK].

Only printers that respond to a broadcast from the computer appear. To use

aprinter not listed here, click [Specify Address], and then enter the IPv4 ad- dress or host name of the printer.

K Check that the name of the printer whose driver you want to install is se- lected, and then click [Next >].

L Change the printer name if you want, and then click [Next >].

Select the [Yes] check box to configure the printer as default.

M Specify whether or not to share the printer, and then click [Next >]. N Specify whether or not to print a test page, and then click [Next >]. O Click [Finish].

The printer driver installation starts.

20