Using the SmartDeviceMonitor Port

P In the [Printer URL] box, enter “http://(printer's address)/printer” as the print- er's address.

If the server authentification is issued, to enable SSL (a protocol for encrypted

 

communication), enter “https://(printer's address)/printer” (Internet Ex-

1

plorer 5.01, or a higher version must be installed).

(example IPv4 address: 192.168.15.16)

http://192.168.15.16/printer

https://192.168.15.16/printer

You can enter “http://(printer's address)/ipp” as the printer's address.

Q Enter a name for identifying the printer in [IPP Port Name]. Use a name different from the one of any existing port.

If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name.

R Click [Detailed Settings] to make necessary settings.

For information about the settings, see SmartDeviceMonitor for Client Help.

S Click [OK].

T Check that the selected port is highlighted in [Printer to the following port], and then click [OK].

U Restart the computer to complete installation.

Note

Auto Run may not work with certain operating system settings. If this hap- pens, launch “Setup.exe” on the CD-ROM root directory.

The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi.

A User Code can be set after the printer driver installation. For information about User Code, see the printer driver Help.

19