Message List

 

 

Message

Problem and solutions

 

 

Attach to print queue <print queue name>

(In the print server mode) Attached to the

 

print queue.

 

 

Authentication mode mismatch< SSID >

Authentication mode is different to the AP.

 

The required SSID is the SSID of the access

 

point connected to when in infrastructure

 

mode.

 

 

centrod is disabled.

Communication via parallel connectionis un-

 

available because centrod is disabled in the se-

 

curity mode.

 

Enable centrod in the security mode.

 

 

Cannot create service connection

(In the remote printer mode) Connection to the

 

file server has not been established. The num-

 

ber of file server users may have exceeded the

 

maximum capacity of the file server.

 

 

Cannot find rprinter (<print server

The printer with the number displayed on the

name>/<printer number>)

print server does not exist. Make sure that the

 

printer number is registered on the print serv-

 

er.

 

 

Change IP address from DHCP Server.

The IP address changes when DHCP lease is

 

renewed. To always assign the same IP ad-

 

dress, set a static IP address to the DHCP serv-

 

er.

 

 

child process exec error! (process name)

The network service failed to start. Turn the

 

printer off and then on. If this does not work,

 

contact your service or sales representative.

 

 

Client password rejected

The client's password was rejected. Check the

 

client password.

 

 

Client tls certificate rejected

The client's TLS certificate was rejected. Check

 

the certificate.

 

 

Connected DHCP Server(<DHCP serverad-

The IP address was successfully received from

dress>).

the DHCP server.

 

 

Could not attach to FileServer<error number>

(In the remote printer mode) Connection to the

 

file server has not been established. The file

 

server has refused the connection. Check the

 

file server configuration.

 

 

Could not attach to PServer<print server>

(In the remote printermode) Connection to the

 

print server has not been established. The

 

print server has refused the connection. Check

 

the print server configuration.

 

 

Current Interface Speed: xxxMbps

Speed of the network (10Mbps, 100 Mbps, or

 

1Gbps).

 

 

Current IP address <currentIP address>

Current IPv4 address.

 

 

Current IPX address<IPX address>

Current IPX address

 

 

DHCP lease time expired.

DHCP lease time has expired.The printer tries

 

to discover the DHCP server again. The IP ad-

 

dress until now becomes invalid.

 

 

6

269